Procedure of Artificial Insemination in Sheep

Artificial Insemination in Sheep

The optimal time for insemination with nonfrozen semen is 12–18 hours after the onset of estrus. When estrus has been synchronized or induced using progestagens and gonadotropins and/or ram effect, most ewes are in estrus within 36–48 hours and ovulate at ~60 hours. Insemination should be done 48–58 hours after P4 pessary removal for cervical insemination, or 48–60 hours for intrauterine insemination with frozen-thawed semen, with highest conception at ~53–54 hours.

Extended fresh or chilled semen can be placed into the vagina or cervix, and extended fresh, chilled, or frozen-thawed semen can be placed into the uterus. Frozen-thawed semen reconstituted with fresh seminal plasma can be placed into the cervix, with conception rates >50%.

Vaginal and Cervical Insemination Procedure in Sheep

An artificial insemination pipette with a 1- to 2-mL syringe attached is placed deep into the vagina. This method is quick and involves minimal restraint of the ewe.

For cervical insemination, the ewe is restrained to limit movement and to present the hindquarters at a convenient height for easy access to the vagina. After cleaning the vulvar region, the cervix is located with the aid of a vaginal speculum and suitable illumination, and the insemination made as deeply as possible into the cervical canal using a long, thin inseminating tube with attached syringe or a semiautomatic inseminating device.

Ai in sheep
Ai in sheep


The relatively long, tortuous, and firm-walled cervical canal of the ewe usually precludes penetration by the tube for >1 cm. In aged, multiparous ewes with cervical tissue distortion, the difficulty increases, and the semen is deposited into the caudal folds of the cervix. In periparturient ewes, the cervix may be fully penetrated. In maiden ewes, in which insertion of the speculum and dilation of the vagina can cause injury, the semen should be deposited in the ventral vagina.

Intrauterine Laparoscopic Insemination in Sheep

For intrauterine laparoscopic insemination in sheep, food and water should be withheld from the ewe for ~12 hours. Ewes should be sedated with 1.5–2 mg xylazine, IM, and placed in cradles that restrain and invert them, first in dorsal recumbency for preparation of the abdomen. Local anesthetic may be injected SC at two sites (~4 cm on each side of the ventral midline and ~6 cm cranial to the udder). The cradle is then raised at the caudal end so that the ewe is tilted at ~45° with the lateral abdomen presented to the operator. The anesthetized sites allow for entrance of two trocars and cannulae; carbon dioxide is insufflated through the first cannula to distend the abdomen. The laparoscope is inserted through the near cannula, the uterine horns are visualized, and a glass or plastic inseminating pipette, or sheathed inseminating gun, is inserted through the second cannula. Semen is deposited into the lumen of the uterus. Conception rates are similar whether semen is deposited into one or both horns of the uterus.

Post a Comment

share your words ...

Last Article Next Article